Low Batteries & Faulty AC Adaptors are the #1 cause of scale malfunction and inaccuracy!          We test all of our scale returns from consumers. Fully 60% of consumer returns are simply dead or low batteries. This sounds silly but it's true! A scale will perform slowly, or read inaccurately when it has low batteries. Please replace the batteries often (and only use good quality batteries). We include good quality batteries with all of our scales but batteries can run low in storage.   A Faulty AC adaptor can cause your scale to act unstable with numbers "jumping" all around.  Please test your scale with a good set of batteries (instead of the AC adaptor) to determine if perhaps the AC adaptor is faulty.

TROUBLESHOOTING & OPERATION NOTES

1) If the scale does not perform accurately, please recalibrate as outlined in the manual.

2) If the Display ever becomes locked on EEEEE, this indicates that the scale was shocked, dropped or otherwise damaged and the delicate weighing sensors have been damaged. You can try recalibrating the scale (If the sensor has not been hurt too badly it may work again after recalibration). Otherwise you will have to follow the warranty instructions that came with your scale.

 3) If the display becomes locked on 8888, this often indicates low power. However sometimes it also may indicate a serious zero mark error. This means when you turn the scale on, it can't determine what zero is (a slight zero mark error will cause situation #1 above) Thus, if new batteries do not fix this error please follow the warranty instructions.

 4) If the display shows UNST, this means the scale is not stable. Try operating the scale on a more stable surface & be sure nothing is on the tray or stuck under the tray when you turn it on. If the problem persists, it may be an indication of fatal sensor damage. 

 5) If the scale is on AC power and it will not properly stabilize (fluctuating weights are shown on the display), this may be caused by a malfunctioning AC adaptor. Please try operating the scale on Battery power to see if the problem persists. If the problem does not occur on Battery power then it is a sign of a bad or improper AC adaptor.  Please replace the AC adaptor.  If the problem occurs on Battery power also, it may be a sign of environmental issues, please the special warning in this manual.

Congratulations on your purchase of the KD-600 Digital Scale.

(not shown)

Included with this scale are 4 clear thin plastic touchpad covers. These are to be used if the scale is subject to messy recipes, or if you use the scale for soapmaking, candlemaking or anything that may cause acids or solvents to drip onto the front panel display. For additional covers please visit our website at www.myweigh.com

This product contains three major features: Weight, Hold & Tare, (grams, ounces, Kg/gm and Lb./oz).

If there is a over-sized envelope (or other items), you can keep the weighing value for 5 seconds after removing an item from the weighing panel by pressing the "HOLD" key before weighing the other item.

Press the "HOLD" Key again. The symbol "Hold" will disappear.

For weight the total weight of multiple items,

Press the "Tare" Key again, the symbol "Tare" will be disappeared. The total weight of all items will be shown on the display.

Press the "kg/lb" Key repeatedly to convert from g/kg to oz/lb or vice verse.

If the weighed item exceeds the maximum loading, the scale will display "Error". It means the item exceeds the scale’s weighing capacity.

Please remove the overweight item from the scale platform to avoid damage to the scale.

Maximum Capacity : 13lb/ 6kg

Resolution : 0.1oz/ 1g

Operating Temperature: 0°C ~ +40°C

Power : 9V Battery or optional AC/DC adaptor

When the battery symbol appears,

Extendable Stand

AC/DC Adaptor Jack (Adapter not included)

Warning – To prevent potential damage make sure only the correct AC adaptor for the scale is used.